Home > Documentation for RhinoResurf

Table of Contents

1. Introduction

Download and Install RhinoResurf for Rhino 4 (32-bit) and Rhino 5/6/7(64-bit)

Loading RhinoResurf into Rhino 4.0 (32-bit) and 5/6/7(64-bit)

License Agreement

2. Command Reference

Command Reference

RsPoints2Surf

RsPoints2SurfOption

RsMesh2Surf

RsMesh2StarFace

RsCurves2Surf

RsMesh2Surfs

RsMesh2SurfsByPolygon

RsFillHoleBySurf

RsSurfaceMatch

RsSurfacemapDlg

RsAutoNurbs

RsPointCloud2Mesh

RsSplitCurveNetwork

RsSplitPointCloud

RsSymmetricPlane

RsMergeMeshs

RsFillMeshholes

RsFaceFromLines

RsFaceFromPolygon

RsMeshBdryCurves

RsrSurfaceFlatten

RsrMeshFlatten

RsRegister(purchase)

3. Tutorials

Tutorials

Tutorial 1 - Convert a mesh to a surface

Tutorial 2 - Convert a surface from a sub-mesh

Tutorial 3 - Drape a surface over a point cloud

Tutorial 4 - Convert a mesh to multiple surfaces with quad face

Tutorial 5 - Use Fix button to smooth the wavy surface in _RsMesh2Surfs

Tutorial 6 - Convert a mesh to multiple surfaces with trimmed surface

Tutorial 7 - Automatic surfaces (solid) generation from mesh

Tutorial 8 - Single surface from curves

Tutorial 9 - Point cloud to mesh

Tutorial 10 - 6 Steps to create a solid from mesh by using RhinoResurf

Tutorial 11 - Fit mesh to NURBS surface by specifying shape type. ( Command: _RsMesh2Surf in RhinoResurf for Rhino 4 or 5)

Tutorial 12 -morph the geometry from original mesh data to compensated mesh data by using command _RsSurfacemap

Tutorial 13 -Point cloud to trimmed surfaceorph the geometry from original mesh data to compensated mesh data by using command _RsSurfacemap

Tutorial 14 -Create multiple surfaces by using command 'CreateQuadMesh' and '_RsMesh2SurfsByPolygon' in Rhino 6 (SR10 or greater)

Tutorial 15 -Fill hole with surface on G1 continuity with neighbor patches

Tutorial 16 -Unfold 3D mesh into 2D mesh

Tutorial 17 - Method for quickly converting cylindrical topology mesh surface into smooth NURBS surface

4. FAQs

FAQ 1 - Why RhinoResurf register dialog does not display in my Rhino

Tutorial 3 - Drape a surface over a point cloud

Video:

If the above video is invalid, please click here to download the video

Step 1 : Start Rhino.

Step 2: Select Import… from the File menu. The import file dialog box is displayed. Browse for the file skidoo.txt (typically located in C:\Program Files\Rhinoceros 4.0\Plug-ins\RhinoResurf\ Samples\) and click Open from the Open dialog box . After a while, the Points File Import Options dialog box is displayed, select the delimiters as Comma and click OK .

Step 3: Zoom to the extents of the drawing ( View->Zoom->Extents ). You will find the mesh from skidoo.txt imported into the current model. Click Single surface from points from the Resurf menu or type RsPoints2Surf at the Rhino command prompt or click icon at RhinoResurf toolbar.

Step 4: The Rhino command prompt ‘Select a point set to create a nurbs surface' is displayed. Click left-mouse button to select the displayed point set, then click right-mouse button after you selected the point set. The dialog box Single surface from points is displayed. An Initial surface, a fitting plane and three directions were generated. The surface result is OK, but it does not reach the desired precision.

Step 5: Click the Apply button in the Single surface from points dialog box. The program will run. After a while, a surface will appear. The prompt Surface updated. max deviation=0.162620. average deviation=0.018632 tell you the tolerance between the surface and the selected point set.

Step 6: If the deviation between the surface and the selected point set is not desired, select the Max Tol choice box and choose a smaller value (such as 0.1), then click the Apply button, the surface will be updated under the constraint of the smaller deviation. Here, select the Max Tol = 0.1, click Apply again, you will see the prompt Surface updated. Max deviation=0.084428; average deviation=0.007079 . Continue to select Max Tol = 0.05, click Apply again, you will see the prompt Surface updated. Max deviation=0.048147; average deviation=0.002755 .
 

Copyright (C) 2007-2020 RESURF All Rights Reserved. Privacy Statement